ReadyLIFT
AIR SPRING SPACER KIT FOR 1" TO 3" LIFTS (FOR USE WITH AIR SPRING IQ-ASA-9000-LP)
SKU: 88-91003
VEHICLE APPLICATION
Check specifications
No verified vehicle application is supplied. Check product specifications before ordering.
Check the vehicle details and specifications below to confirm compatibility with your build.
PRODUCT DETAILS
For LOGIQ Air Spring Kits kits mounted over the axle (not the leaf spring), spacers are required if the truck is equipped with lift blocks. This kit provides (3) 1" stacking spacers per side which are configurable to match the amount of lift the truck is equipped with. Spacers are compatible with the IQ-ASA-9000-LP air springs.
For use with 88-31070 and 88-31190
Learn more about LOGIQ and Air Solutions!
Kit components
(6) 1" Composite Air Spring Spacers(1) Hardware Kit
Installation
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
INSTALLATION ALIGNMENT NOTE: Your vehicle may require alignment after product installation. You may incur additional costs to align the vehicle.
INSTALLATION HEADLAMP AIM NOTE: In addition to your vehicle alignment, for your safety and others, it is necessary to check and adjust your vehicle headlamps for proper aim and alignment after product installation. You may incur additional costs to adjust the headlamp system.
INSTALLATION ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE: If your vehicle is equipped with active or passive safety/collision monitoring and/or assistance/avoidance systems including, but not limited to, camera- or radar/sonar-based systems, check and adjust your vehicle's systems for proper aim and function after product installation. In some instances, your vehicle may require OEM dealer service tools and factory-trained technicians to re-calibrate ADAS. You may incur additional costs to adjust ADAS systems.